The smallest chain complying to ANSI is 25 of 6.35 mm pitch. On the other hand, in response on the demands for smaller sized chains in recent times for high engineering machinery such as workplace products, health-related machines and industrial robots, we provide 15 of four.7625 mm (3/16 inch) pitch and in addition 15H1 being a high-power version of 15. These substantial precision chains are produced beneath serious high-quality manage specially expected for tiny sizes, taking dress in resistance also into consideration.
Collection of chain
Refer to the “Low-speed selection”. Having said that, the chain operation velocity is often set considerably substantial according to the sort of lubrication as shown inside the table beneath.
Connecting backlinks and offset backlinks
R connecting back links are employed for tiny pitch chains. Even so, due to the fact their power is lower than that on the base chain, and because the clip is likely to come off in large pace operation, the use of connecting back links is not recommended. Use a loop chain without attaching connecting links.
Offset back links can be found for chains besides 15 and 15H1, but their use just isn’t encouraged to the same reason as stated for the R Connecting back links.
Operating velocity and form of lubrication
15: A higher precision mini-pitch bushing chain that may be smaller than a compact drive chain for common applications, 25
25: Smallest bushing chain between ANSI standard chains utilizing curl bushings.
35: A ANSI common bushing chain ideal for small precision machines that call for large strength.