Materials Dealing with Power UNIT one
This energy unit is created for that fork lift sector, consisting of highly productive gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down motion are managed through the lever of the guide release valve, that’s equipped with an electric switch to activate the motor. The lowing velocity is controlled from the stress compensated flow handle valve.
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic parts concerned in advance of installation of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities, N46 hydraulic oil is advised .
four. Oil changing is required right after the first one hundred operation hours, afterwards as soon as every single 3000 hours.
5. The energy unit shown is intended to be mounted horizontally.
Materials Handling Energy UNIT two
This electrical power unit attributes power up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve together with the decreasing velocity controlled by the pressure compensated flow manage valve. Products of this series may be extensively utilized in the business of logistic devices including fork lift, mini lift table, etc.
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned before mounting the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
4. Oil changing is required soon after the original 100 operation hrs,afterwards the moment each and every 3000 hours.
5. The energy unit needs to be mounted horizontally.