DC MOTOR PUMP GROUP one
General Description
Consisting of a heavy duty DC motor along with the CB1S gear pump, this pump motor group is an perfect hydraulic power unit for mobile hydraulic equipments, this kind of as automobile carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
Common Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump consists of a 4.5″ DC motor along with a CBSR gear pump which has a common electrical power up/gravity down circuit having a relief valve, a test valve plus a solenoid release valve.
Specific Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic elements concerned prior to mounting the power unit.
three. Viscosity with the hydraulic oil shoud be 15~68 cst, which must also be clean and absolutely free of impurities. N46 hydraulic oil is proposed.
four. The electrical power unit needs to be mounted horizontally.
five. The relief valve stress is preset about 25% larger compared to the operating pressure.
6. Flow management valve for lowing speed adjustment is available unpon request.