Why Coupling Grease?
Satisfactory lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is specifically built for gear coupling applications to increase coupling daily life while significantly reducing maintenance time. Its high viscosity base oil and tackifier combine to help keep the grease in area and stop separation and it can be in full compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and manufactured using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces generally observed in couplings. Bearing or general purpose greases are inclined to separate and eliminate effectiveness because of large centrifugal forces to the many elements at higher rotational speeds. These large centrifugal forces encountered in couplings separate the base oil from your thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate in the gear tooth mesh area resulting in premature coupling failure. Gear Coupling Grease is built to highly resistant to centrifugal separation of the oil and thickener, which permits the lubricant for being utilised to get a rather long period of time.
Among the list of secrets and techniques for the results of Gear Coupling Grease may be the variable consistency throughout the functioning cycle on the application. The consistency of our gear coupling grease modifications with all the operating conditions. Functioning with the lubricant under real support problems brings about the grease to grow to be semi-fluid, functionally solash lubricating the dress in surfaces in the coupling. Because the grease cools, it returns for the unique consistency, thereby avoiding leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and five lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Large load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in place below higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated by using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?